1. Place at a distance of >5ft
2. Plug in and press the power button
3. Wait for the boot-up Lumi logo to disappear
4. Adjust lens focus by turning the wheel on the device

1. Plug in the stick to Lumi's back-side HDMI port
2. Plug in the stick's power cable to back-side Lumi's USB port
3. With Lumi's remote - click up arrow and navigate to SETTINGS -> SOURCE -> select HDMI
4. You're good to go! Use Roku's remote to navigate the interface and apps (connect to WiFi in Roku's settings section)

Please note: you will still use Lumi's remote to control volume and adjust the projection image settings such as keystone correction. Click the HOME button on Lumi's remote to return to Lumi's interface at anytime.

1. AUTO KEYSTONE: go to SETTINGS → PROJECTOR IMAGE SETTINGS → AUTO TRAPEZOID
2. MANUAL KEYSTONE: go to SETTINGS → PROJECTOR IMAGE SETTINGS → NO AUTO TRAPEZOID:

• 4 POINT KEYSTONE - manually adjust the image corners
• HORIZON & VECTOR KEYSTONE - click to adjust the horizontal and vertical sliders

Optionally adjust zoom % in this SETTINGS section as well

1. Find the bottom reserved screw hole
2. Input, rotate and tighten the top tripod screw

Netflix is only accessible via “Mouse Mode”

1. Click on Netflix app
2. Enter email/phone and password using arrows then "OK" button once entered
3. Once email/phone and password are entered, click "Mouse Mode" button located on the remote to scroll the cursor (using arrow keys) to the red "SIGN IN" bar, click "OK"
4. If you forgot your log in information, you may click "RECOVER PASSWORD" and or "USE SIGN IN CODE", which will provide you either a 4-digit passcode or email you new password set up

Click here for a video walkthrough

Plug in via HDMI and find screen options on the computer desktop, then one of 3 display modes:

1. Duplicate mode: computer and projector display the same screen
2. Extended mode: the projector displays the extended screen of the computer
3. Display only:

• Monitor 1: only display the laptop screen
• Monitor 2: only display the projector screen

Go to SETTINGS → LANGUAGE SETTINGS → choose language

1. Go to SETTINGS → SOURCE → choose HDMI/USB
2. Press the HOME button to set and return

Go to SETTINGS → FACTORY RESET → RESET

Go to SETTINGS → PROJECTOR IMAGE SETTING → INSTALL MODE → select FRONT-DESKTOP /REAR-DESKTOP/FRONT-CELLING/REAR-CELLING

The projector comes standard with an IR (infrared) remote control. If the remote control does not work, try to point the remote control at a wall or behind the projector.

If there are movable dust particles or relatively large dust particles on the screen, you can turn on the projector, then turn the projector's lens down, slap the projector body, and let the fan blow away the dust.